Common faults and solutions in the use of solar high pole street lights

In the process of using solar high pole lights, various failures may occur due to the influence of itself or the external environment. When a failure is encountered, it must be resolved in time to reduce the negative impact caused by the failure

First, battery failure

Shortening the lighting time of solar high pole lights, especially on rainy and rainy days, the lack of battery energy may be caused by battery failure. Simply replacing the battery will solve the problem.

Second, the light source problem

That is to say, there are quality problems in the light source of the high pole street lamp, such as poor welding or lamp head failure, etc. The existence of these problems will affect the use of the lamp.

Third, the line problem

The lamp circuit has poor contact, so the performance of the lamp will be affected, or even it cannot be used. As long as the broken circuit is repaired, the problem can be avoided.

Fourth, the whole light is not on

Check the controller of the lamp. If the controller enters the water, the lamp will not light. If the controller is normal, then see if the battery has voltage, there is no voltage, or the voltage is lower than the specified standard so that the lamp cannot work normally. Just replace the battery board.

In short, there are many reasons for the failure of solar high-pole street lights. When a failure occurs, it must be checked in time to understand the cause of the failure so that the problem can be addressed in a targeted manner. If you don't know how to detect the fault, please find a professional maintenance team to operate to ensure the quality of lamp maintenance. Also, landscape lamp manufacturers must remind everyone that when purchasing high pole lights, they must buy high-quality products from big brands, so that the chance of lamp failure is relatively low. Even if a failure occurs, the manufacturer can provide good after-sales service.