What impact will typhoon rain have on solar street lights?

Source: SRESKY Views: 37 2020-11-11 12:17:46

        The southern coast of my country is an area with a high incidence of typhoons. Therefore, installing solar street lights on both sides of urban roads requires special attention to wind and waterproofing.

solar street lights

  After a typhoon, we often see some trees broken or even overturned by the typhoon, which has a serious impact on people's personal safety and traffic. Similarly, the LED street lights and solar street lights installed on both sides of the road are also facing the typhoon. Risks and injuries to people or vehicles from breaking street lights are more direct and lethal, so how to resist typhoons has become an important matter.

  So how can outdoor lighting street lights such as LED street lights and solar street lights resist typhoons? Relatively speaking, the higher the height, the greater the force. In the face of strong wind, a 10-meter street lamp is often more likely to be broken than a 5-meter street lamp. This is not to say that we should avoid installing tall street lights. One reason for this is related to the product itself.

solar street lights

  For solar street lights, resistance to typhoons should start from three aspects: First, the foundation should be buried deeper and installed with buried cages. This is to strengthen the connection between the street lights and the ground and prevent the strong wind from pulling the street lights. Up or blowdown. Second, avoid cutting corners and thickening the material of the light pole. In order to save the material of the light pole, the possible risk is that the light pole is broken halfway, because the light pole is made too thin and the height of the light pole is high. It is easy to be broken, solar street light poles should be able to withstand at least a level 12 typhoon, and most areas in the north should be able to withstand a level 10 gale. Third, it is very important to reinforce the solar panel bracket, because there is a possibility that the solar panel will be blown off directly because of no force, so it is necessary to use a material with high hardness. Then the prevention of LED street lights only needs to do the first two steps of the first three steps.