What are the precautions for installing solar lights?
The installation of solar street lights is much simpler and more convenient than traditional street lights. Therefore, some grassroots construction workers may take it lightly and enter some misunderstandings when installing solar street lights. What should be paid attention to when installing solar street lights?
1.There are obstructions in the installation place
Daylight is the main source of energy for solar street lights. If there are obstructions around, such as trees and buildings, it will inevitably affect the sunlight, and the solar panels cannot receive enough light energy, which will affect the use of street lights. In addition to large-area shielding of solar panels, small-area shielding is also not possible. For example, if there is an iron rod above the solar panel, a shadow will be formed on the solar panel, and the shadow part will be in a disconnected state, which will affect the absorption and utilization of light energy. This is still secondary. If things go on like this, it will cause damage to the battery panel and shorten the service life.
It should be noted that some friends install solar street lights in the garage. In this case, it is best to use a separate installation. The solar panels are installed in an unobstructed place outdoors and the light source is installed indoors.
2.There are other light sources in the installation place
Many people often make this mistake when installing solar garden lights. In order to ensure the lighting efficiency and save energy, they usually choose the dual control model of light control and time control. If there are other light sources next to the solar street light, it is very It may cause the charging voltage of the solar panel to be above the light control voltage point, and the light cannot be turned on. Therefore, avoid other light sources within a certain range during installation.
3.Feel free to extend the cable
Although it is best to install solar street lights in the garage separately, it does not mean that the connection line of the solar panel can be extended at will, or even connected by wires.
The longer the line, the more power is lost during transportation, and the use efficiency of solar street lights will also decrease. If the quality of the wire itself is not good, it will increase the line loss. Therefore, even if the connection line is to be extended, it must be controlled at a certain level. The range of wires must be carefully selected.
4.Parameter setting error
There is a very important link in the installation of solar street lights. There is a stage of trial operation. Use the engineering remote control to check whether the functions of the solar street lights are normal. Adjusting this requires a certain degree of professionalism.
Do solar led street lights need to pay attention to wind resistance?
Do you know the three advantages of solar street light?
What is the difference between the ratio of solar led street lights and traditional road lighting？
Is it suitable to install intelligent sensor solar street lights in rural areas?
Which kind of solar garden light is of good quality?
What scope does the integrated solar street light apply to?
How much is the price of a solar street light
What kind of road is more suitable for solar street lights
What are the common lights in landscape lighting design?