How to maintain the solar landscape light after installation

2020-10-22 11:31:35

        For solar landscape lights, check whether the battery panels are displaced immediately after a strong wind, heavy rain, heavy snow, or the rainy season and whether water enters or accumulates in the control room and the lithium battery box. After a thunderstorm, check whether the device is working properly, and its charge and discharge Whether the controller is damaged, etc. If there is dust or other dirt, you should first rinse with clean water, and then gently wipe the water stains with clean gauze. Do not rinse or probe with hard objects or corrosive solvents. Lithium battery packs matched with solar battery modules should be used in strict accordance with the maintenance methods of lithium batteries. Regularly check the wiring of the solar landscape light circuit system to avoid loose wiring and check the grounding resistance of the solar landscape light.

solar landscape light

  Maintenance method of solar landscape light after installation

  1: The photoelectric conversion rate of solar street light panels (conversion rate = power/area) is related to this parameter. There are two types of monocrystalline silicon and polycrystalline silicon. Generally speaking, the conversion rate of polycrystalline silicon is usually about 14%, and the highest It can only reach 19%. It is of course better to choose a solar panel with a monocrystalline silicon panel, but because the production cost of the panel is higher than that of a polycrystalline silicon panel, the unit price is also high. You can switch it according to your needs when choosing. A good sun lamp must ensure sufficient lighting time and brightness. For this reason, the requirements for batteries are of course not low. At present, there are mainly two types of lead-acid batteries (gel batteries) and lithium iron phosphate batteries. The traditional lead-acid batteries have stable voltage, low price, and simple maintenance.

solar landscape light

  2: The fast-developing lithium iron phosphate battery has obvious advantages in terms of depth of discharge and charging time, and has strong adaptability to the environment. Generally, it can be used in an environment of -20℃~60℃. After special treatment, it can adapt to the lowest temperature. Up to -45℃, the application environment is wider. Lithium iron phosphate batteries are also smaller in size and weight than lead-acid batteries, simple in construction and good in effect. Therefore, lithium iron phosphate batteries are the best choice in terms of batteries. All the lithium iron phosphate batteries used by Nanlai solar lamps have long lighting time and brightness. Also enough.

  3: The use and maintenance of solar landscape lights directly affect the service life of solar landscape lights, affect the operating cost of solar landscape lights, and affect efficiency. Doing a good job in the maintenance of solar landscape lights is a means to maintain the good operation of the system.