How to maintain solar street light in summer
With the temperature rising in most parts of the northern hemisphere, most areas enter the hot summer, and the lively night activities are also on the scene, barbecue, square dance, night running, night market, and noisy children. This time a good lighting environment is provided. A lot of conveniences. Because of the convenient construction and the trouble of the mains wiring, solar street light plays an increasingly important role in outdoor lighting, but because many people do not know much about solar street light, they often have various problems during use.
First, a common problem is battery feeding. As a manufacturer specializing in the production and installation of the solar street light, we have recently received relevant consultations. We believe that solar street lights are not bright because of the reasons for feeding. Battery feeding may be caused by excessive battery life and normal loss; it may also be that the construction party cuts corners when the construction is first, or the quality of the product purchased by the consumer is cheap but not cheap; or the installation location is not Too reasonable, the green plant is blocked as a feed. At this time, it is generally necessary to replace the new battery or cut off the green plant cover.
Secondly, the summer rain increases the solar street lights to enter the water. Now the street light waterproof level is above IP65. There is no problem in normal outdoor use, but it does not rule out the use of improper installation or some manufacturers' product quality is not enough to cause the lamp to leak, so there is no problem. At this time, it is generally necessary to replace the street light.
Third, damage to other accessories. In the summer, there are many situations such as strong winds or heavy rains. We often see the phenomenon that the street light poles are tilted to the ground on the road. As a whole system, solar street light is damaged during the use due to various reasons. At this time, professional maintenance and inspection personnel are required to check the reasons.
In fact, there are many methods, which require the user to constantly summarize in the process of use, find the problem and feedback the problem to the manufacturer in time. Only in this way can we avoid these things more effectively.